Effect of preparation design and endodontic access on fracture resistance of zirconia overlays in mandibular molars: An in vitro study.

PURPOSE: To evaluate the fracture resistance of zirconia overlays, considering various preparation designs and the presence of endodontic access. MATERIALS AND METHODS: Ninety translucent zirconia (5Y-PSZ) overlay restorations were divided into six groups (n = 15/group) based on different preparation designs, with and without endodontic access: chamfer margin 4 mm above the gingival level without (group 1) and with endodontic access (group 2); margin 2 mm above the gingival level without (group 3) and with endodontic access (group 4); overlay with no chamfer margin without (group 5) and with endodontic access (group 6). Restorations were bonded to mandibular first molar resin dies, and the groups with endodontic access were sealed with flowable resin composite. All restorations underwent 100,000 cycles of thermal cycling between 5°C and 55°C, followed by loading until fracture. Maximum load and fracture resistance were recorded. ANOVA with Tukey post-hoc tests were used for statistical comparison (α < 0.05). RESULTS: Fracture resistance significantly varied among overlay designs with and without endodontic access (p < 0.001), except for the no-margin overlays (groups 5 and 6). Overlays with a 2 mm margin above the gingival margin with endodontic access (group 4) exhibited significantly higher fracture resistance compared to both the 4-mm supragingival (group 2) and no-margin (group 6) designs, even when compared to their respective intact groups (groups 1 and 5). There were no significant differences between the no-margin and 4-mm supragingival overlays. CONCLUSION: The more extensive zirconia overlay for mandibular molars is the first choice since the 2 mm margin above the gingival level design withstood considerable loads even after undergoing endodontic access. A no-margin overlay is preferred over the 4-mm supragingival design as it preserves more tooth structure and there was no outcome difference, irrespective of endodontic access. Caution is warranted in interpreting these findings due to the in vitro nature of the study.

Contemporary guideline-directed medical therapy in de novo, chronic, and worsening heart failure patients: First data from the TITRATE-HF study.

AIMS: Despite clear guideline recommendations for initiating four drug classes in all patients with heart failure (HF) with reduced ejection fraction (HFrEF) and the availability of rapid titration schemes, information on real-world implementation lags behind. Closely following the 2021 ESC HF guidelines and 2023 focused update, the TITRATE-HF study started to prospectively investigate the use, sequencing, and titration of guideline-directed medical therapy (GDMT) in HF patients, including the identification of implementation barriers. METHODS AND RESULTS: TITRATE-HF is an ongoing long-term HF registry conducted in the Netherlands. Overall, 4288 patients from 48 hospitals were included. Among these patients, 1732 presented with de novo, 2240 with chronic, and 316 with worsening HF. The median age was 71 years (interquartile range [IQR] 63-78), 29% were female, and median ejection fraction was 35% (IQR 25-40). In total, 44% of chronic and worsening HFrEF patients were prescribed quadruple therapy. However, only 1% of HFrEF patients achieved target dose for all drug classes. In addition, quadruple therapy was more often prescribed to patients treated in a dedicated HF outpatient clinic as compared to a general cardiology outpatient clinic. In each GDMT drug class, 19% to 36% of non-use in HFrEF patients was related to side-effects, intolerances, or contraindications. In the de novo HF cohort, 49% of patients already used one or more GDMT drug classes for other indications than HF. CONCLUSION: This first analysis of the TITRATE-HF study reports relatively high use of GDMT in a contemporary HF cohort, while still showing room for improvement regarding quadruple therapy. Importantly, the use and dose of GDMT were suboptimal, with the reasons often remaining unclear. This underscores the urgency for further optimization of GDMT and implementation strategies within HF management.

Basilar Impression: A Systematic Review and Meta-Analysis of Clinical Features, Operative Strategies and Outcomes.

OBJECTIVE: Basilar Impression (BI) is a rare yet debilitating abnormality of the craniovertebral junction (CVJ), known to cause life-threatening medullary brainstem compression. Our study analyzes surgical approaches for BI and related outcomes. METHODS: A systematic review was conducted using PubMed, Google Scholar, and Web of Science electronic databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines to critically assess primary articles examining BI. RESULTS: We analyzed 87 patients from 65 articles, mostly female (55.17%) with a mean age of 46.31 ± 17.94 years, commonly presenting with motor (59.77%) and sensory deficits (55.17%). Commonly employed procedures included posterior occipitocervical fusion (24.14%), anterior decompression (20.69%), and combined anterior decompression with posterior fusion (21.84%). Patients who underwent anterior approaches were found to be older (55.38 ± 17.67 vs. 45.49 ± 18.78 years, p < 0.05) and had a longer duration from symptom onset to surgery (57.39 ± 64.33 vs. 26.02 ± 29.60 months, p < 0.05) compared to posterior approaches. Our analysis revealed a significant association between a longer duration from symptom onset to surgery and an increased likelihood of undergoing odontoidectomy and decompression (OR: 1.02, 95% CI: 1.00-1.03, p < 0.05). Furthermore, after adjusting for all other covariates, a history of rheumatoid arthritis and the use of a posterior approach were significantly associated with an elevated risk of postoperative complications (p < 0.05). CONCLUSIONS: The treatment approach to complex CVJ disease should be tailored to the surgeon's experience and the nature of the compressive pathology.

Fracture resistance of partial and complete coverage veneers and ceramic crowns for maxillary central incisors.

STATEMENT OF PROBLEM: Minimally invasive treatments have gained popularity in recent years. However, research comparing the fracture resistance of lithium disilicate partial coverage veneer restorations with that of ceramic crowns is lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the fracture resistance of lithium disilicate restorations fabricated for preparations of various designs. The designs included veneer preparations with finish lines in the upper, middle, and lower third of the facial surface and ceramic crown preparations with margins in the lower third of the facial surface. All restorations were designed and fabricated using a chairside digital workflow. MATERIAL AND METHODS: Four maxillary right central incisor typodont teeth were prepared for partial coverage veneer preparation with the margin in the upper middle third of the facial surface (PU1/3); partial coverage veneer preparation with margin in lower middle third of the facial surface (PL1/3); complete coverage veneer preparation (CV) with margin in the cervical region; and ceramic crown (CC) preparation. Each preparation was scanned, and 15 casts were 3D printed from each scan. A total of 60 lithium disilicate restorations were fabricated (n=15 per group) using a chairside computer-aided design and computer-aided manufacturing (CAD-CAM) system (Primescan and MCXL). The different restorations were cemented to the 3D printed testing dies with a photopolymerizable resin cement. The specimens were artificially aged with 10 000 thermal cycles between 5 and 55 °C with a dwell time of 30 seconds and were loaded to failure using a universal testing machine. The maximum load to fracture was analyzed using a 1-way ANOVA and post hoc Tukey honestly significant difference (HSD) test (α=.05). Additionally, the fracture patterns of the specimens were evaluated with a stereomicroscope for descriptive purposes. RESULTS: The mean fracture resistance of the chairside CAD-CAM lithium disilicate veneers and ceramic crowns was statistically different depending on the design of the restoration (P<.05). Group CC demonstrated the highest fracture resistance values (1440.66 N), followed by CV (929.8 N) and PU1/3 (756.13 N). The lowest value was for PL1/3 (532.4 N). CONCLUSIONS: The fracture resistance measured for the maxillary central incisor partial coverage veneers with margins in the middle third of the facial surface appear capable of resisting average occlusal forces. However, these veneers demonstrated lower fracture resistance values when compared with complete coverage veneers. Further, lithium disilicate crowns demonstrated higher fracture resistance than veneers, irrespective of their design.

Exploring the impact of music on response to ketamine/esketamine: A scoping review.

Music and ketamine are both known to affect therapeutic outcomes, but few studies have investigated their co-administration. This scoping review describes the existing literature on the joint use of music and ketamine-or esketamine (the S(+) enantiomer of ketamine)-in humans. The review considers that extant studies have explored the intersection of ketamine/esketamine and music in healthy volunteers and in patients of various age groups, at different dosages, through different treatment processes, and have varied the sequence of playing music relative to ketamine/esketamine administration. Studies investigating the use of music during ketamine anesthesia are also included in the review because anesthesia and sedation were the early drivers of ketamine use. Studies pertaining to recreational ketamine use were omitted. The review was limited to articles published in the English language but not restricted by publication year. To the best of our knowledge, this scoping review is the first comprehensive exploration of the interplay between music and ketamine/esketamine and offers valuable insights to researchers interested in designing future studies.

Dysplastic crypt-rings in tandem: A novel histologic parameter in tubular adenomas.

Descriptions of the various dysplastic crypt phenotypes occurring in TA have remained unattended in the literature. Recently, new crypt-phenotypes, characterized by crypt rings in tandem (CRT), and by dysplastic crypt rings in tandem (DCRT) were described in IBD, and in in IBD-associated dysplasia, respectively. Here, we report the occurrence of DCRT in 40.4 % (n = 59) out of 146 consecutive tubular adenomas of the colorectum (TA). The number of DCRT varied: 10 TA had two DCRT, seven TA had three DCRT, two TA, four DCRT and the remaining two TA had ≥ five DCRT. The frequency of DCRT was influenced by TA-size; larger TA (≥ 5 mm) had significantly more DCRT than smaller TA (<5 mm). Conversely, the frequency of TA with DCRT was not influenced by age, gender, or localization. Since only 1 or 2 sections were available per TA, the number of DCRT in the entire TA should be higher than those shown in Results. Historical controls in human and rodent normal colorectum showed no CRT. Moreover, DCRT were not found in 781 historical non-polypoid colorectal adenomas. The present finding might encourage searching for DCRT, the final goal being to achieve a more elaborated microscopic narrative of TA, the most prevalent of all colorectal adenomas.

Outcomes of Blood Flow Restriction Training After ACL Reconstruction in NCAA Division I Athletes.

Background: Blood flow restriction training (BFRT) is a safe and potentially effective adjunctive therapeutic modality for postoperative rehabilitation related to various knee pathologies. However, there is a paucity of literature surrounding BFRT in high-performance athletes after anterior cruciate ligament reconstruction (ACLR). Purpose: To (1) compare the overall time to return to sports (RTS) in a cohort of National Collegiate Athletic Association (NCAA) Division I athletes who underwent a standardized rehabilitation program either with or without BFRT after ACLR and (2) identify a postoperative time interval for which BFRT has the maximum therapeutic benefit. Study Design: Cohort study; Level of evidence, 3. Methods: A total of 55 student-athletes who underwent ACLR between 2000 and 2023 while participating in NCAA Division I sports at a single institution were included in this study. Athletes were allocated to 1 of 2 groups based on whether they participated in a standardized postoperative rehabilitation program augmented with BFRT (BFRT group; n = 22) or completed the standardized protocol alone (non-BFRT group [control]; n = 33). Our primary outcome measure was time to RTS. The secondary outcome measure was handheld dynamometry quadriceps strength testing at various postoperative time points, converted to a limb symmetry index (LSI). Quadriceps strength was not tested between the BFRT and non-BFRT groups because of the limited amount of data on the control group. Results: The mean age at the date of surgery was 18.59 ± 1.10 years for the BFRT group and 19.45 ± 1.30 years for the non-BFRT group (P = .011), and the mean RTS time was 409 ± 134 days from surgery for the BFRT group and 332 ± 100 days for the non-BFRT cohort (P = .047). For the BFRT group, the mean quadriceps strength LSI increased by 0.67% (95% CI, 0.53%-0.81%) for every week of rehabilitation, and there was a significantly positive rate of change in quadriceps strength in weeks 13-16 compared with weeks 9-12 (ΔLSI, 8.22%; P < .001). Conclusion: In elite NCAA Division I athletes, a statistically significant delay was observed in RTS with BFRT compared with standardized physical therapy alone after undergoing ACLR. There also appeared to be an early window during the rehabilitation period where BFRT had a beneficial impact on quadriceps strength.

Machine Learning Identifies Variation in Timing of Palliative Care Consultations Among Traumatic Brain Injury Patients.

Background and Objective Timely palliative care involvement offers demonstrable benefits for traumatic brain injury (TBI) patients; however, palliative care consultations (PCCs) are used inconsistently during TBI management. This study aimed to employ advanced machine learning techniques to elucidate the primary drivers of PCC timing variability for TBI patients. Methods Data on admission, hospital course, and outcomes were collected for a cohort of 232 TBI patients who received both PCCs and neurosurgical consultations during the same hospitalization. Principal Component Analysis (PCA) and K-means clustering were used to identify patient phenotypes, which were then compared using Kaplan-Meier analysis. An extreme gradient boosting model (XGBoost) was employed to determine drivers of PCC timing, with model interpretation performed using SHapley Additive exPlanations (SHAP). Results Cluster A (n = 86) consisted mainly of older (median [IQR] = 87 [78, 94] years), White females with mild TBIs and demonstrated the shortest time-to-PCC (2.5 [1.0, 7.0] days). Cluster B (n = 108) also sustained mild TBIs but comprised moderately younger (81 [75, 86] years) married White males with later PCC (5.0 [3.0, 10.8] days). Cluster C (n = 38) represented much younger (46.5 [29.5, 59.8] years), more severely injured, non-White patients with the latest PCC initiation (9.0 [4.2, 17.0] days). The clusters did not differ by discharge disposition (p = 0.4) or frequency inpatient mortality (p > 0.9); however, Kaplan-Meier analysis revealed a significant difference in the time from admission to PCC (p < 0.001), despite no differences in time from admission to mortality (p = 0.18). SHAP analysis of the XGBoost model identified age, sex, and race as the most influential drivers of PCC timing. Conclusions This study highlights crucial disparities in PCC timing for TBI patients and underscores the need for targeted strategies to ensure timely and equitable palliative care integration for this vulnerable population.

Effects of ivermectin on development of Calliphora vicina, Robineau-Desvoidy 1830 (Diptera, Calliphoridae).

Ivermectin is one of the most widely used drugs for parasite control. Previous studies have shown a reduction in the abundance and diversity of "non-target" coprophilous organisms due to the presence of ivermectin (IVM) in bovine faecal matter (FM). Due to its breadth of behavioural habits, Calliphora vicina is a suitable dipteran species to evaluate the effects of IVM in FM. The aim of this work was to evaluate the effect of five concentrations of IVM in FM (3000, 300, 100, 30, and 3 ng/g) on the development of C. vicina. The following endpoints were evaluated: survival (between the first larval stage and emergence of new adults), larval development times to pupation and pupation times to adult, and adult emergence (% sex) and LC50. Sampling was performed from larval hatching at 60 and 120 min and at 3, 4, 5, and 12 h, and every 24 h specimens were weighed until pupae were observed. Data were analysed by ANOVA using a non-parametric Kruskal-Wallis test and as a function of elapsed development time and accumulated degree hours (ADH). Mortality at 3000 and 300 ng/g was 100% and 97%, respectively. There were statistically significant delays in adult emergence time (p = 0.0216) and in the ADH (p = 0.0431) between the control group (C) and 100 ng/g. The LC50 was determined at 5.6 ng/g. These results demonstrate the lethal and sub-lethal effects of IVM on C. vicina, while highlighting the usefulness of this species as a bioindicator for ecotoxicological studies.

Optimization of quenched fluorescent peptide substrates of SARS-CoV-2 3CLpro main protease (Mpro) from proteomic identification of P6-P6' active site specificity.

SARS-CoV-2 3C-like main protease (3CLpro) is essential for protein excision from the viral polyprotein. 3CLpro inhibitor drug development to block SARS-CoV-2 replication focuses on the catalytic non-prime (P) side for specificity and potency, but the importance of the prime (P') side in substrate specificity and for drug development remains underappreciated. We determined the P6-P6' specificity for 3CLpro from >800 cleavage sites that we identified using Proteomic Identification of Cleavage site Specificity (PICS). Cleavage occurred after the canonical P1-Gln and non-canonical P1-His and P1-Met residues. Moreover, P3 showed a preference for Arg/Lys and P3' for His. Essential H-bonds between the N-terminal Ser1 of protomer-B in 3CLpro dimers form with P1-His, but not with P1-Met. Nonetheless, cleavage occurs at P1-Met456 in native MAP4K5. Elevated reactive oxygen species in SARS-CoV-2 infection oxidize methionines. Molecular simulations revealed P1-MetOX forms an H-bond with Ser1 and notably, strong positive cooperativity between P1-Met with P3'-His was revealed, which enhanced peptide-cleavage rates. The highly plastic S3' subsite accommodates P3'-His that displays stabilizing backbone H-bonds with Thr25 lying central in a "'threonine trio" (Thr24-Thr25-Thr26) in the P'-binding domain I. Molecular docking simulations unveiled structure-activity relationships impacting 3CLpro-substrate interactions, and the role of these structural determinants was confirmed by MALDI-TOF-MS cleavage assays of P1'- and P3'-positional scanning peptide libraries carrying a 2nd optimal cut-site as an internal positive control. These data informed the design of two new and highly soluble 3CLproquenched-fluorescent peptide substrates for improved FRET monitoring of 3CLpro activity with 15× improved sensitivity over current assays.IMPORTANCEFrom global proteomics identification of >800 cleavage sites, we characterized the P6-P6' active site specificity of SARS-CoV-2 3CLpro using proteome-derived peptide library screens, molecular modeling simulations, and focussed positional peptide libraries. In P1', we show that alanine and serine are cleaved 3× faster than glycine and the hydrophobic small amino acids Leu, Ile, or Val prevent cleavage of otherwise optimal non-prime sequences. In characterizing non-canonical non-prime P1 specificity, we explored the unusual P1-Met specificity, discovering enhanced cleavage when in the oxidized state (P1-MetOX). We unveiled unexpected amino acid cooperativity at P1-Met with P3'-His and noncanonical P1-His with P2-Phe, and the importance of the threonine trio (Thr24-Thr25-Thr26) in the prime side binding domain I in defining prime side binding in SARS-CoV-2 3CLpro. From these analyses, we rationally designed quenched-fluorescence natural amino acid peptide substrates with >15× improved sensitivity and high peptide solubility, facilitating handling and application for screening of new antiviral drugs.

Glycemic Control and Body Weight Reduction with Once-Weekly Semaglutide in Colombian Adults with Type 2 Diabetes: Findings from the COLIBRI Study.

INTRODUCTION: Type 2 diabetes is a prevalent condition. The change in glucose control and body weight with the use of once-weekly semaglutide was evaluated in individuals with Type 2 diabetes in Colombia. METHODS: This was a real-world, multi-centre, single-arm study involving adults in Colombia with Type 2 diabetes treated with once-weekly subcutaneous semaglutide for approximately 26 weeks. The primary endpoint assessed the change in glycated hemoglobin (HbA1c) from baseline to end of study. Secondary endpoints included changes in body weight from baseline to end of study. The study also explored the proportion of participants achieving predefined HbA1c targets and weight-loss responses at the end of the study. RESULTS: Data from 225 patients across 11 centers were collected. Most patients were women (65%), and the mean age of the population was 57 years with a median HbA1c of 7.6% and a median body weight of 86 kg. After approximately 26 weeks, semaglutide was associated with a significant reduction in HbA1c of - 0.88 and a body weight reduction of - 4.04kg. The proportion of patients with HbA1c < 7% increased from 32 to 66% at end of study. CONCLUSION: Patients treated with once-weekly semaglutide experienced a clinically significant reduction in HbA1c and body weight. These results are in line with previous clinical trials.

Long-Chain Lipids Facilitate Insertion of Large Nanoparticles into Membranes of Small Unilamellar Vesicles.

Insertion of hydrophobic nanoparticles into phospholipid bilayers is limited to small particles that can incorporate into a hydrophobic membrane core between two lipid leaflets. Incorporation of nanoparticles above this size limit requires the development of challenging surface engineering methodologies. In principle, increasing the long-chain lipid component in the lipid mixture should facilitate incorporation of larger nanoparticles. Here, we explore the effect of incorporating very long phospholipids (C24:1) into small unilamellar vesicles on the membrane insertion efficiency of hydrophobic nanoparticles that are 5-11 nm in diameter. To this end, we improve an existing vesicle preparation protocol and utilized cryogenic electron microscopy imaging to examine the mode of interaction and evaluate the insertion efficiency of membrane-inserted nanoparticles. We also perform classical coarse-grained molecular dynamics simulations to identify changes in lipid membrane structural properties that may increase insertion efficiency. Our results indicate that long-chain lipids increase the insertion efficiency by preferentially accumulating near membrane-inserted nanoparticles to reduce the thermodynamically unfavorable disruption of the membrane.

Monocyte distribution width (MDW) and DECAF: two simple tools to determine the prognosis of severe COPD exacerbation.

Monocyte distribution width (MDW) has been associated with inflammation and poor prognosis in various acute diseases. Chronic obstructive pulmonary disease (COPD) exacerbations (ECOPD) are associated with mortality. The objective of this study was to evaluate the utility of the MDW as a predictor of ECOPD prognosis. This retrospective study included patient admissions for ECOPD. Demographic, clinical and biochemical information; intensive care unit (ICU) admissions; and mortality during admission were recorded. A total of 474 admissions were included. MDW was positively correlated with the DECAF score (r = 0.184, p < 0.001) and C-reactive protein (mg/dL) (r = 0.571, p < 0.001), and positively associated with C-RP (OR 1.115 95% CI 1.076-1.155, p < 0.001), death (OR 9.831 95% CI 2.981- 32.417, p < 0.001) and ICU admission (OR 11.204 95% CI 3.173-39.562, p < 0.001). High MDW values were independent risk factors for mortality (HR 3.647, CI 95% 1.313-10.136, p = 0.013), ICU admission (HR 2.550, CI 95% 1.131-5.753, p = 0.024), or either mortality or ICU admission (HR 3.084, CI 95% 1.624-5.858, p = 0.001). In ROC analysis, a combined MDW-DECAF score had better diagnostic power (AUC 0.777 95% IC 0.708-0.845, p < 0.001) than DECAF (p = 0.023), MDW (p = 0.026) or C-RP (p = 0.002) alone. MDW is associated with ECOPD severity and predicts mortality and ICU admission with a diagnostic accuracy similar to that of DECAF and C-RP. The MDW- DECAF score has better diagnostic accuracy than MDW or DECAF alone in identifying mortality or ICU admission.

Electrically Reconfigurable Phase-Change Transmissive Metasurface.

Programmable and reconfigurable optics hold significant potential for transforming a broad spectrum of applications, spanning space explorations to biomedical imaging, gas sensing, and optical cloaking. The ability to adjust the optical properties of components like filters, lenses, and beam steering devices could result in dramatic reductions in size, weight, and power consumption in future optoelectronic devices. Among the potential candidates for reconfigurable optics, chalcogenide-based phase change materials (PCMs) offer great promise due to their non-volatile and analogue switching characteristics. Although PCM have found widespread use in electronic data storage, these memory devices are deeply sub-micron-sized. To incorporate phase change materials into free-space optical components, it is essential to scale them up to beyond several hundreds of microns while maintaining reliable switching characteristics. This study demonstrated a non-mechanical, non-volatile transmissive filter based on low-loss PCMs with a 200 µm×200 µm switching area. The device/metafilter can be consistently switched between low- and high-transmission states using electrical pulses with a switching contrast ratio of 5.5 dB. The device was reversibly switched for 1250 cycles before accelerated degradation took place. The work represents an important step toward realizing free-space reconfigurable optics based on PCMs. This article is protected by copyright. All rights reserved.

Exposome and Metabolome Analysis of Sugarcane Workers Reveals Predictors of Kidney Injury.

Introduction: Sugarcane workers are exposed to potentially hazardous agrochemicals, including pesticides, heavy metals, and silica. Such occupational exposures present health risks and have been implicated in a high rate of kidney disease seen in these workers. Methods: To investigate potential biomarkers and mechanisms that could explain chronic kidney disease (CKD) among this worker population, paired urine samples were collected from sugarcane cutters at the beginning and end of a harvest season in Guatemala. Workers were then separated into 2 groups, namely those with or without kidney function decline (KFD) across the harvest season. Urine samples from these 2 groups underwent elemental analysis and untargeted metabolomics. Results: Urine profiles demonstrated increases in silicon, certain pesticides, and phosphorus levels in all workers, whereas heavy metals remained low. The KFD group had a reduction in estimated glomerular filtration rate (eGFR) across the harvest season; however, kidney injury marker 1 did not significantly change. Cross-harvest metabolomic analysis found trends of fatty acid accumulation, perturbed amino acid metabolism, presence of pesticides, and other known signs of impaired kidney function. Conclusion: Silica and certain pesticides were significantly elevated in the urine of sugarcane workers with or without KFD. Future work should determine whether long-term occupational exposure to silica and pesticides across multiple seasons contributes to CKD in these workers. Overall, these results confirmed that multiple exposures are occurring in sugarcane workers and may provide insight into early warning signs of kidney injury and may help explain the increased incidence of CKD among agricultural workers.

Septin 7 interacts with Numb to preserve sarcomere structural organization and muscle contractile function.

Here, we investigated the mechanisms by which aging-related reductions of the levels of Numb in skeletal muscle fibers contribute to loss of muscle strength and power, two critical features of sarcopenia. Numb is an adaptor protein best known for its critical roles in development, including asymmetric cell division, cell-type specification, and termination of intracellular signaling. Numb expression is reduced in old humans and mice. We previously showed that, in mouse skeletal muscle fibers, Numb is localized to sarcomeres where it is concentrated near triads; conditional inactivation of Numb and a closely related protein Numb-like (Numbl) in mouse myofibers caused weakness, disorganization of sarcomeres, and smaller mitochondria with impaired function. Here, we found that a single knockout of Numb in myofibers causes reduction in tetanic force comparable to a double Numb, Numbl knockout. We found by proteomics analysis of protein complexes isolated from C2C12 myotubes by immunoprecipitation using antibodies against Numb that Septin 7 is a potential Numb-binding partner. Septin 7 is a member of the family of GTP-binding proteins that organize into filaments, sheets, and rings, and is considered part of the cytoskeleton. Immunofluorescence evaluation revealed a partial overlap of staining for Numb and Septin 7 in myofibers. Conditional, inducible knockouts of Numb led to disorganization of Septin 7 staining in myofibers. These findings indicate that Septin 7 is a Numb-binding partner and suggest that interactions between Numb and Septin 7 are critical for structural organization of the sarcomere and muscle contractile function.

Prediabetes as a risk factor for all-cause and cause-specific mortality: a prospective analysis of 115,919 adults without diabetes in Mexico City.

BACKGROUND: Prediabetes has been associated with increased all-cause and cardiovascular mortality. However, no large-scale studies have been conducted in Mexico or Latin America examining these associations. METHODS: We analyzed data from 115,919 adults without diabetes (diagnosed or undiagnosed) aged 35-84 years who participated in the Mexico City Prospective Study between 1998 and 2004. Participants were followed until January 1st, 2021 for cause-specific mortality. We defined prediabetes according to the American Diabetes Association (ADA, HbA1c 5.7% to 6.4%) and the International Expert Committee (IEC, HbA1c 6.0-6.4%) definitions. Cox regression adjusted for confounders was used to estimate all-cause and cause-specific mortality rate ratios (RR) at ages 35-74 years associated with prediabetes. FINDINGS: During 2,085,392 person-years of follow-up (median in survivors 19 years), there were 6,810 deaths at ages 35-74, including 1,742 from cardiovascular disease, 892 from renal disease and 108 from acute diabetic crises. Of 110,405 participants aged 35-74 years at recruitment, 28,852 (26%) had ADA-defined prediabetes and 7,203 (7%) had IEC-defined prediabetes. Compared with those without prediabetes, individuals with prediabetes had higher risk of all-cause mortality at ages 35-74 years (RR 1.13, 95% CI 1.07-1.19 for ADA-defined prediabetes and RR 1.28, 1.18-1.39 for IEC-defined prediabetes), as well as increased risk of cardiovascular mortality (RR 1.22 [1.10-1.35] and 1.42 [1.22-1.65], respectively), renal mortality (RR 1.35 [1.08-1.68] and 1.69 [1.24-2.31], respectively), and death from an acute diabetic crisis (RR 2.63 [1.76-3.94] and 3.43 [2.09-5.62], respectively). RRs were larger at younger than at older ages, and similar for men compared to women. The absolute excess risk associated with ADA and IEC-defined prediabetes at ages 35-74 accounted for6% and 3% of cardiovascular deaths respectively, 10% and 5% of renal deaths respectively, and 31% and 14% of acute diabetic deaths respectively. INTERPRETATION: Prediabetes is a significant risk factor for all-cause, cardiovascular, renal, and acute diabetic deaths in Mexican adults. Identification and timely management of individuals with prediabetes for targeted risk reduction could contribute to reducing premature mortality from cardiometabolic causes in this population. FUNDING: Wellcome Trust, the Mexican Health Ministry, the National Council of Science and Technology for Mexico, Cancer Research UK, British Heart Foundation, UK Medical Research Council. Instituto Nacional de Geriatría (Mexico City).

Fracture resistance of chairside CAD-CAM lithium disilicate occlusal veneer with various designs after mechanical aging.

PURPOSE: This study evaluated the fracture resistance of chairside computer-aided design and computer-aided manufacturing (CAD-CAM) lithium disilicate crown, onlay, and non-anatomical occlusal veneer (A-OV) with and without margin fabricated. MATERIALS AND METHODS: Sixty-four CAD-CAM lithium disilicate restorations were designed as (1) complete coverage crown (CCC); (2) A-OV with margin; (3) non-A-OV with margin (NA-OV-M); and (4) non-A-OV without margin (NA-OV-NM), 16 of each. Restorations were crystallized and adhesively luted to resin dies using resin cement. Specimens were then subjected to 400,000 cycles of chewing in a mastication simulator. A universal testing machine was used to apply a compressive load at a crosshead speed of 1 mm/min to the long axis of the tooth with a stainless-steel sphere until fracture occurred. One-way ANOVA followed by post hoc tests were used to assess the impact of preparation design on the fracture load of CAD-CAM lithium disilicate restorations. RESULTS: The highest fracture load was recorded for CAD-CAM lithium disilicate indirect restorations for non-A-OVs preparation with margin (2549 ± 428 N) and onlay (2549 ± 293 N) and the lowest fracture load was recorded for CCCs (2389 ± 428 N); however, there was no significant (p = 0.640) between groups. CONCLUSIONS: CAD-CAM lithium disilicate restorations fabricated for anatomical and non-A-OV preparation display a fracture resistance similar to CCCs. Conservative partial coverage restorations may be considered an acceptable approach for posterior teeth.

Fracture load of chairside CAD-CAM veneers fabricated with pre-and fully crystalized lithium disilicate ceramics.

PURPOSE: To evaluate the fracture load of chairside computer-aided design and computer-aided manufacturing (CAD-CAM) veneers fabricated with two conventional pre-crystallized and two fully crystallized lithium disilicate ceramic materials. MATERIALS AND METHODS: Seventy-five chairside CAD-CAM veneers (15 specimens/group) for maxillary right central incisors were fabricated with different lithium disilicate brands: (1) IPS e.max CAD; (2) Amber Mill; (3) Cerec Tessera; (4) n!ce Straumann; and (5) GC Initial LiSi Block. Restorations were cemented with resin luting cement (Variolink Esthetic, Ivoclar) to 3D-printed resin dies. Bonded restorations received 5000 thermal cycles and then were loaded until fracture. Statistical analysis included One-Way ANOVA. RESULTS: Conventional pre-crystallized e.max CAD displayed the highest fracture load value (640 N), followed by fully-crystallized n!ce Straumann (547 N), pre-crystallized Cerec Tessera (503 N), pre-crystallized Amber Mill (476 N), respectively; fully-crystallized GC Initial LiSi Block (431 N) displayed the lowest values. When comparing the fracture load of recent lithium disilicate ceramic material to the e.max group, which acted as the control, significant differences were noted. The LiSi Block GC group, in particular, had considerably higher mean difference values (208.867, p < 0.001, 95% CI [89.63, 328.10]), as did the Amber Mill group (164.200, p = 0.002, 95% CI [44.96, 283.44]) and CEREC Tessera group (137.533, p = 0.016, 95% CI [18.30, 256.77]). The e.max and n!ce Straumann groups had no statistically significant differences in mean scores (92.933, p = 0.198, 95% CI [-26.30, 212.17]). These findings imply that the clinical performance of recent lithium disilicate veneers varies when compared to the e.max CAD group. CONCLUSIONS: The fracture load of chairside CAD-CAM lithium disilicate veneers for maxillary central incisors varies according to the type of ceramic brands. Conventional pre-crystallized e.max CAD displayed higher fracture load than the recent pre- and fully-crystallized lithium disilicate materials, emphasizing the significance of choosing the right product based on the desired clinical outcome.

Heat treatment and homogenization influence the gastric digestion of bovine milk protein in growing pigs as an adult human model.

BACKGROUND: Bovine milk processing influences the structure of the curd formed during gastric digestion, which may alter gastric protein hydrolysis and impact amino acid (AA) release into the small intestine. OBJECTIVE: This study aimed to determine the influence of heat treatment and homogenization on the gastric protein digestion and amino acid emptying of bovine milk. METHODS: Nine-week-old pigs (n=144) consumed either raw, pasteurized non-homogenized (PNH), pasteurized-homogenized (PH), or ultra-high-temperature homogenized (UHT) bovine milk for ten days. On day 11, fasted pigs received the milk treatment (500 mL) before gastric contents were collected at 0, 20, 60, 120, 180, and 300 min postprandially. The apparent degree of gastric protein hydrolysis (based on the release of free amino groups), apparent gastric disappearance of individual proteins (based on SDS-PAGE gel band intensity), and the gastric emptying of digested protein and AA were determined. RESULTS: During the first 60 min, the rate of apparent gastric protein hydrolysis was fastest for pigs fed UHT milk (0.29%/min vs on average 0.07%/min for pigs fed raw, PNH, and PH milk). Differences in the apparent degree of gastric protein hydrolysis and emptying were reflected in the rate of digested protein entering the small intestine. The AA gastric emptying half-time was generally shorter for pigs fed PH and UHT milk than pigs fed raw and PNH milk. For example, the gastric release of total essential AA was more than twofold faster (P<0.01) for pigs fed PH or UHT milk compared to pigs fed raw or PNH milk (i.e., homogenized vs non-homogenized milk). CONCLUSIONS: Heat treatment and homogenization increased the apparent gastric degree of protein hydrolysis and the release of digested protein into the small intestine. However, the rate of AA entering the small intestine was mainly increased by homogenization.